Part Number Hot Search : 
NSR01F30 VCO3073 55NSR H11D23SD 2N5401 TRPW48L2 MCR10105 D2203
Product Description
Full Text Search
 

To Download 67-21-GHC-AS2U1B17Z-2T Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Features
P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use.
Device Selection Guide
Chip Emitted Color Material InGaN Brilliant Green Water Clear Resin Color
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 1 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Package Dimensions
Note: The tolerances unless mentioned is 0.1mm, Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 2 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 95 150 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
Electro-Optical Characteristics (Ta=25)
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol IV 21/2 p d VF IR Min. 225 --------517.5 ----2.50 ----Typ. ----120 518 ----35 --------Max. 565 --------535.5 ----3.50 50 Unit mcd deg nm nm nm V A Condition IF=10mA IF=10mA IF=10mA IF=10mA IF=10mA IF=10mA VR=5V
Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 3 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Bin Range of Luminous Intensity
Bin Code S2 T1 T2 U1 Min. 225 285 360 450 Max. 285 360 450 565 mcd IF=10mA Unit Conduction
Bin Range of Dominant Wavelength
Group Bin B10 B11 B12 B13 A B14 B15 B16 B17 B18 Min 517.5 519.5 521.5 523.5 525.5 527.5 529.5 531.5 533.5 Max 519.5 521.5 523.5 525.5 527.5 529.5 531.5 533.5 535.5 nm IF=10mA Unit Condition
Bin Range of Forward Voltage
Groups Bin Code 9 10 B17 11 12 13 Min. 2.50 2.70 2.90 3.10 3.30 Max. 2.70 2.90 3.10 3.30 3.50 V IF=10mA Unit Condition
Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 4 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Typical Electro-Optical Characteristics Curves
Spectrum Distribution Relative Luminous Intensity (%) Ta=25 100 Forward Current IF (mA) Forward Current vs. Forward Voltage Ta=25
0
25
50
75
400
450
500
550
600
24
2.6
3.0
3.4
3.8
4.2
Wavelength (nm)
Forward Voltage( vF)-volts Relative Luminous Intensity vs Relative luminous intensity (%) Forward Current 1000 Ta=25
R Relative Luminous Intensity (%)
Relative Luminous Intensity vs. 1000 Ambient Temperature
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
1 0 10
1 10 Forward Current
2 10 I F (mA) 20 Ta=25 30
Ambient Temperature Ta (C ) Forward Current Derating Curve Forward Current IF (mA) 50 40 0.9 1.0 30 20 10 0 0 20
Radiation Diagram 0 10
40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6
40
60
85
100
Ambient Temperature T (C ) a
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
0.7 0.8
Rev. 1 Prepared by: Tracy
Page: 5 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Label Explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: Tolerances Unless Dimension 0.1mm , Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 6 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel.
Note: Tolerances Unless Dimension 0.1mm, Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 7 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1 2 3 4 5 6 7
Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Hours/Cycles 6 Min. 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS.
Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 8 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
Precautions for Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 9 of 10
Technical Data Sheet Top View LEDs
67-21/GHC-AS2U1B17Z/2T
4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. :DSE-0001399
http://www.everlight.com Prepared date:30-Apr-2009
Rev. 1 Prepared by: Tracy
Page: 10 of 10


▲Up To Search▲   

 
Price & Availability of 67-21-GHC-AS2U1B17Z-2T

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X